Diagnostic Tool, Automotive Sending Error Codes by SMS/GPRS

Model Number: TK228-ER09732 Brand Name: Neutral Key Specifications/Special Features: It is an integration of OBD GPS tracker, RFID car alarm and Bluetooth diagnostics.It's plug-and-play design, super easy to install.Functions:1. Plug & play design with OBD-II connector, compatible with most vehicles with OBD-II connector, supports most CAN-BUS communication protocols2. It is integration of GPS tracker + RFID car alarm + Bluetooth diagnostics + wireless immobilizer3. Arm/disarm by SMS/phone call, or by 2.4GHz RFID tag automatically4. Check real physical address (such as city name, street name) directly5. Track by SMS/website to get latitude, longitude, speed, direction & odometer6. Movement alarm, over-speed alarm, Geo-fence alarm7. Engine on alarm, power failure alarm, vibration alarm8. Anti-tamper alarm. Once device disconnected, it triggers the alarm
9. Built-in shock sensor for power saving & triggering vibration alarm
10. Monitor the voice
11. Supports 2.4GHz long-distance contactless RFID function (optional)
12. Keyless RFID car alarm function (optional)
13. Accurate odometer & speed reading directly via CANbus
14. Data logger 8MB for offline GPS waypoint
15. Read the vehicle error code & clear the error code
16. Built-in rechargeable backup battery, when the car battery is cut off or damaged, the built-in backup battery can work for emergency check, and the system will send out power failure alert immediately.
17. Two kinds of location information; user can check the GPS latitude, longitude, speed, direction. If there is no GPS signal, user could also locate the car by GSM base station code.
18. Remote diagnostics function. Transmission of the following data via blue-tooth or GPRS network:
(1) Battery's voltage, RPM, speed, TAP throttle opening, engine load, coolant temperature, fuel consumption, odometer, error code & times, acceleration times & deceleration times;
(2) Driver behavior data: ignition time, total driving time, total idling time, average engine hot-start time, average speed, history high speed, history RPM, total acceleration times & total deceleration times.
19. Work with immobilizer to lock engine safely and send alarm.

Alarm type
.Vibration alarm
In arming status, if the car is vibrated, the system will send out alert SMS.
Power failure alarm
In arming status, if the device is taken off from the OBD-II connector, it will trigger this alarm.
Engine on alarm
In arming status, if the car engine is turned ON, it will trigger this alarm. You will get alert SMS firstly & then two calls from the system.
Movement alarm
In arming status, the movement alert is enabled automatically. Once the car moves away from the parking point for 90 meters, it will trigger this alarm.